single arm slab polish machine Manual

The single-arm slab polishing machine you described is a manual, up-down machine capable of polishing stone slabs with dimensions of 30001500 mm. It features a main motor of 5 Hp, operating on 3-phase 50Hz power supply. The machine has a manual handle for operation and is constructed with an MS (Mild Steel) body. To install the machine, it requires a foundation with dimensions of 600600 mm and should be mounted on four bolts for stability.

Here's a summary of the machine's specifications:

1. Design: Single-arm slab polishing machine with manual, up-down mechanism.
2. Slab Size Capacity: Can polish stone slabs up to 3000*1500 mm in size.
3. Main Motor: 5 Hp electric motor operating on 3-phase 50Hz power supply.
4. Body Material: Constructed with an MS (Mild Steel) body for durability.
5. Manual Operation: The machine is operated manually using a handle.
6. Water Feed System: Likely equipped with a water feed system to cool the stone slab during polishing.
7. Installation: Requires a foundation with dimensions of 600*600 mm for stable mounting.
8. Mounting: The machine should be installed on four bolts for secure attachment to the foundation.

This machine is suitable for smaller fabrication workshops or projects that do not require fully automated polishing equipment. Its manual operation and relatively compact size make it a practical choice for polishing stone slabs within the specified dimensions. However, since it requires a foundation with precise dimensions and proper mounting, it is essential to ensure the installation is done correctly to maintain stability and safety during operation. Proper training and adherence to safety guidelines are necessary for the operator to use the machine effectively and safely.